Currency »
0 item(s), £0.00  |  Checkout

Restore Rust Remover 500ml 

Restore Rust Remover 500ml £ 24.75 In stock
£24.75


25+ in stock

Quantity

Restore Rust Remover 500ml - Trade strength, conservation quality.

Restore Rust Remover is a water-based, non-acidic, non-toxic, biodegradable derusting concentrate. The contents of the 500ml bottle, when mixed with plain tap water makes 10 litres of reuseable fluid (approx 2 gallons). Because it does not contain any acids, only the rust is removed, leaving good metal undamaged. Once the rust has been removed the chemical reaction stops. (Products containing phosphoric acid will remove both the rust and a certain amount of good metal which may not be desirable). Because of the absence of acids, there is no danger of flash rusting occurring when parts are removed from the bath. In fact, parts will remain rust free without further protection for a considerable period, allowing plenty of time for painting, chemically blackening, or plating parts or tools. Alternatively, to give longer protection in the ‘bare’, cleaned state, they may be protected with MetalGuard Ultra, GreaseXtra or ToolGuard VCI. The derusting solution may be used over and over again until the solution becomes blackened and the reaction time becomes excessively slow. Because the residue is completely biodegradable the spent solution may be flushed down the drain without harm to the environment. Litre for litre, Restore Rust Remover is the most economical product of its kind currently available. Restore Rust Remover is supplied in a 250ml plastic bottle. To get the best performance from Restore Rust Remover please read the Hints & Tips

Restore Rust Remover Photo Gallery

Nickel brightening demonstration

Record 043 Plough Plane Restoration

 

Testimonials:-

I use the diluted RESTORE in an ultrasonic bath and leave it for a few days before stiff brushing under running water. That's freed up items that were rusted solid. I was very impressed. My experience with Restore is that it's good value for money and the firm that make it has very helpful courteous people who respond quickly to After sales queries. MCB 

Test piece worked well. Must use degreaser first. I found it more effective than the gel.  (27/07/2015) John Neil – Oxfordshire

Vintage hand saw restoration
W. Phillips
I applied a small drop of neat fluid, off the tip of a cocktail stick - just a 3mm diameter bead onto one of the rustier saws yesterday evening and saw the bubble blacken up within 10 seconds - immediately washed it off and was astonished at the matt grey clean perfect 3mm circle I was left with. Holding it up to the sunlight it literally sparkled......... I know it needs to be diluted, was just curious. The saw restoration was a complete successes - Restore Rust Remover really cleaned up the plate and restored the original "silvered" finish in the non-rusty areas - gives a very good impression of exactly what this saw looked like when new. Just like to say that, initially sceptical, I am now very impressed with the results and have another 6 saws that will be receiving the same treatment !

J Neil
Test piece worked well. Must use degreaser first. I found it more effective than the gel.  27/07/2015 J. Neil – Oxfordshire

MCB
I use the diluted RESTORE in an ultrasonic bath and leave it for a few days before stiff brushing under running water. That's freed up items that were rusted solid. I was very impressed. My experience with Restore is that it's good value for money and the firm that make it has very helpful courteous people who respond quickly to After sales queries.

Customers who bought this item also bought these...

Online - Start Chat?

Your name *

 

Cancel